How do I choose atex filling systems for wine and cider production?
Atex filling systems can be suitable when the product, packaging, required good output and site conditions match the technology. Filling equipment projects for potentially explosive atmospheres, where the site zone, product and complete installation must be assessed. For wine and cider, the important variables include still and sparkling products in bottles, cans and bag-in-box formats. Final suitability should be confirmed with representative samples and a written acceptance test.
Quick answer
Atex filling systems can be suitable when the product, packaging, required good output and site conditions match the technology. Filling equipment projects for potentially explosive atmospheres, where the site zone, product and complete installation must be assessed. For wine and cider, the important variables include still and sparkling products in bottles, cans and bag-in-box formats. Final suitability should be confirmed with representative samples and a written acceptance test.
What should I check first?
- Define the required finished-pack result for wine and cider.
- Record the product, packaging dimensions, normal variation and current production method.
- Measure the fault using an objective result such as quantity, torque, seal integrity, code readability, position or good output.
- Check whether the fault follows a product batch, packaging batch, refill, changeover, speed change or machine station.
- Keep one variable constant at a time so the original cause is not hidden by several adjustments.
Why is this production problem happening?
- The product or packaging varies outside the assumptions used to set the atex filling systems.
- The product is not being presented consistently to the working station.
- Wear, contamination, incorrect assembly or an unsuitable setting changes the machine response.
- The selected machinery principle is not the best match for the required product, pack or measurement method.
How can I correct or improve it?
- Stabilise product and packaging presentation before changing final settings.
- Correct wear, contamination, alignment and transfer faults found during the checks.
- Run representative samples through the complete filling & dosing sequence.
- Agree a measurable acceptance test covering normal production, replenishment, stops and changeover.
What should I send Lancing?
- Representative product or current safety information where relevant
- Minimum and maximum packaging samples
- Required quantity, position, seal, torque or code acceptance criteria
- Current and required good packs per hour
- Photographs, a short production video, layout and available utilities
Which applications does this answer cover?
This answer applies to wine and cider where the production stage is filling & dosing and the visible problem relates to changeover and multi-format difficulties. The relevant product or pack route is liquids, creams, gels & pastes.
Questions people also ask
What should I check first?
Define the required finished-pack result for wine and cider. Measure the fault using an objective result such as quantity, torque, seal integrity, code readability, position or good output.
Why can this problem appear intermittently?
Intermittent faults often follow normal variation in product, packaging, presentation, temperature, refill level, line pressure or wear. Record the sequence rather than inspecting only the final failed pack.
Do I need to send samples?
Yes. Representative samples help confirm whether atex filling systems can control the real product and packaging. Include the smallest, largest and least stable or most difficult format.
What output should I specify?
Specify sustained good packs per hour, including normal replenishment, short stops and changeover. A catalogue cycle rate is not the same as saleable output.
How is the final machinery choice confirmed?
Confirm the choice with a written requirement, sample review, representative trial and measurable acceptance test for wine and cider.
Explore ATEX filling systems
Filling equipment projects for potentially explosive atmospheres, where the site zone, product and complete installation must be assessed. Final suitability remains subject to the actual application and sample review.